Order Beau Marine Code Zero Gennaker Furlers & Optional Extras

Code Zero Furler Model 010S

Designed for the code zero ‘small boat’ market up to 10.5 mtrs and as a staysail furler on bigger boats.
The 010S is milled from solid aluminium and uses a high load sealed stainless steel bearing.
The 010S is of simple design and constructed to withstand the environment yacht racing can provide.
The 010S uses 6mm endless line.
By rotating the drum, the anti-torsion rope will turn causing the sail to furl around the luff.
The halyard tension must be tight when furling.
The sail can be lowered and placed in a bag. Wash the furler with fresh water when storing.
Drum size is 95mm.
Safe working load is 900 kg. ( .9 tonne )
Safe working load is a tested load.
Monohull and multihull develop different loadings, please contact Beau Marine for assistance with your selection.
Suggested sail area 40m2*
* All suggested sail areas are an estimate only.
Sailing on different wind angles will increase or decrease loadings. Talk to your sail maker or direct to BEAU MARINE.

Download spec sheet 369kb

Code Zero Furler 012M

For sails that include an anti-torsion rope sewn into the luff of the sail.
Installation is simple. Just attach the furler to the tack and attach the halyard swivel to the head.
The 012M uses 10 to 12mm endless line.
When the drum is turned the anti-torsion rope will also turn. It is very important to ensure that the halyard tension is tight. The sail will furl around the anti-torsion rope allowing it to be lowered and stored in a bag when not in use.
Be sure to wash with fresh water when storing.
Milled from solid aluminium including the housing for the endless line.
Bearings are sealed stainless steel.
The endless line enters and exits through two sets of BEAU fairlead rollers.
Drum size is 145mm ( approx.. 6”)
Safe working load is 2400kg ( 2.4 Tonne )
Safe working load is a tested load.
Monohull and multihull develop different loadings, please contact Beau Marine for assistance with your selection.
Suggested sail area 100m2 (1070 ft.)*

Download spec sheet 369kb

Racing Code Zero Furler 012R (Carbon)

The race version of the 012M.
A weight saving carbon housing replaces the aluminium.
All other specifications are the same as the 012M.

Download spec sheet 369kb

Top Down Gennaker Furler 012TD

For sails that do not have an anti-torsion rope sewn into the luff .
The 012TD is a “top down furler”. The tack of the sail is attached to the rotating tack ring on the furler preferably by a binding of 2mm dynema or a similar product. Do not use steel shackle.
The head of the sail is attached to the halyard swivel.
The anti-torsion rope connects the head swivel to the furler swivel .
The 012TD uses 10 to 12mm endless line.
When turning the drum the head will turn first while the tack remains still. The result is that the gennaker will furl from the top down.
The system is ideal for cruising and short-handed sailing and is light weight so could also be included in your race kit.
Milled from solid aluminium apart from the 316 stainless steel shaft.
The furler is fitted with a sealed stainless bearing and the tack ring has a further two sets of stainless steel sealed bearings.
Be sure to wash with fresh water when storing.
Drum size is 145mm ( approx. 6” )
The endless furling line enters and exits the furler through two sets of BEAU fairlead rollers.
Custom made thimbles for all models are available from Beau Marine.
Safe working load of 2400kg ( 2.4 tonne ).
Safe working load is a tested load.
Monohull and multihull develop different loadings, please contact Beau Marine for assistance with your selection.
Suggested sail area 100m2 ( 1070 ft. ) *

Download spec sheet 369kb

Top Down Adapter for 012TD

The adaptor is designed to convert the 012M Code Zero Furler to a Top Down Furler. The adaptor fits into the top of the Code Zero Furler creating an instant Top Down. Simply leave your adaptor on your gennaker, ready to fit into your code zero furler.

These are designed with the cruiser in mind. One furler will do two jobs. If you are ‘on the wind’ or ‘eased sheets’ and using your code zero and the wind swings aft, simply roll up the zero and put it away. Drop the adaptor into the furler and roll out the gennaker.
Features include simplicity, High power to weight ratio, Twin Stainless Steel High load ball-bearings.
Safe working load is 2400 kg ( The same as the 012M, 012TD and 012R )*

Safe working load is a tested load.
Monohull and multihull develop different loadings, please contact Beau Marine for assistance with your selection.

$NZD 576.35

Optional Extras

Additional Head Swivel for 010S

$NZD 188.00 each

Additional Head Swivel for 012M, 012R and 012TD

$NZD 258.00 each

Thimble for 010S

The thimble is to suit 8mm Torque rope.
Beau Marine recommend the use of these purpose designed thimbles to ensure maximum strength when full load is applied to the furler.

$NZD 80.73 each

Thimble for for 012M, 012R and 012TD

The thimble is to suit 10mm Torque rope.
Beau Marine recommend the use of these purpose designed thimbles to ensure maximum strength when full load is applied to the furler.

$NZD 111.00 each

Lewmar Syncro Snap Shackle for 010S

$NZD 47.38 each

Lewmar Syncro Snap Shacklefor 012M, 012R and 012TD

$NZD 106.95 each

Self Locking 5mm D Shackle for 010S

$NZD 12.50 each

Self Locking 9mm D Shackle for 012M, 012R and 012TD

$NZD 16.90 each